20% Off · First-Time & Seniors20% Off for First-Time Customers & Seniors, Mention This Website When Booking
Claim →Claim Offer →New downlights, extra downlights or a whole new layout, planned with you on the ceiling before a single hole is cut.

New downlights, extra downlights or a whole new layout, planned with you on the ceiling before a single hole is cut.

In short
Near Me Electrical is a licensed A-Grade electrician that installs LED downlights in Melbourne homes, from a few extra lights over a kitchen bench to a complete new layout in a renovated living area. We mark every position on the ceiling with you first, fit IC-4 rated fittings that can sit against insulation, and pair each dimmer with the right driver. You get a fixed price in writing before we start and a Certificate of Electrical Safety when we finish.
Most downlight jobs go wrong at the planning stage, not the install. Lights get placed in a neat grid that ignores the room: a shadow falls across the bench where you actually chop, the couch sits in the brightest spot, and the hallway gets one light too few. We start by asking how each room is used, then mark the positions in pencil on the ceiling so you can stand in the room and see the plan before anything is cut. If a joist sits where a light should go, we find it now and shift the layout, rather than discovering it with a hole saw.
We fit IC-4 rated downlights, which can sit directly against ceiling insulation. That matters because older halogen layouts often had insulation cut back around each light to stop it overheating, which leaves cold spots in the ceiling. You choose the colour: warm white suits bedrooms and living areas, cooler white suits kitchens, laundries and studies, and dimmable fittings make sense anywhere you want the light lower at night. If you're adding lights to a room that already has some, we match the colour of the existing ones so the new lights don't stand out.
Flickering, buzzing or a dimmer that only works over a narrow range is almost always a mismatch between the dimmer and the LED driver. We choose the dimmer and the driver as a pair, then test the full range on every circuit before we leave. If you already have older dimmers that were installed for halogens, we'll tell you whether they'll work with the new lights or need replacing.
Adding lights to a finished room is the most common job we see: a kitchen that's too dark at the bench, a lounge lit by one ceiling batten, or a bedroom that needs reading light. We run new cable through the ceiling space, cut neat holes for each fitting, and connect the new lights to an existing switch or a new one where you want it. Where ceiling access is good, a room of six to ten downlights with a switch moved is usually done in a day.
In older Melbourne homes we check the ceiling space before quoting. Original rubber-insulated cable goes brittle with age and can crack when it is disturbed, so it needs to be found before anyone starts working around it. If we find wiring that isn't safe to connect new lights to, we'll show you and quote the fix separately, rather than install over the top of it. See our house rewiring page if a rewire is on the cards.
The fixed price covers the fittings, the cable, the labour, any switch or dimmer changes we've agreed, testing on every circuit we touch, and a Certificate of Electrical Safety. We use Clipsal or HPM switches and accessories as standard, and our work is backed by a lifetime workmanship guarantee. Booked jobs carry no callout fee. Replacing old halogens one for one rather than adding new lights? Our LED lighting upgrades page covers halogen-to-LED swaps.
Suburb guides: Hawthorn, Camberwell, Brighton, Toorak, Richmond and Essendon.
What Melbourne says
"Ben is very competent and thoughtful licensed electrician who goes out of his way to understand what his customer wants. He is on time, quotes immediately and arrives on the day he says he will - unlike others I have dealt with. His work is neat and tidy (replaced/installed 12 down lights plus dimmers and two outdated smoke alarms). He cleans up/vacuums at the end of the job. His price was very fair. Very highly recommended."
Stephen Phillips
Google review, downlights and dimmers
"Ben from Near Me Electrical and Air was a pleasure to deal with. He was effective in his communication, arrived the time he said he would and did a great job installing our new downlights. He was very professional and friendly with his approach to the job. Would definitely use Near Me again."
stefan condello
Google review, downlights
"Came and installed new downlights in our home. Great service and price. Got the job done when he said he would. Highly recommend."
Stephen S
Google review, downlights
Yes. LED downlights are hardwired fittings, so installing them is licensed electrical work in Victoria. Screw-in LED globes are the only part you can swap yourself.
Yes. We match the colour and style of the existing lights where we can, and connect the new ones to the existing switch or a new one.
IC-4 rated downlights can, and that's the type we fit. It lets the insulation be laid back over the ceiling properly.
It depends on how many lights and how easy the ceiling is to get into. A single room of new downlights is usually finished in a day, and we confirm the timing in your fixed quote.
Explore more